WE ENGINEER ENGINEERING

Fire & Blast Rated Door

Steel Hawk has established itself as an integrated provider for fire rated door for onshore and offshore for PETRONAS Carigali Sdn Bhd.  Our single point of responsibility in providing installation and maintenance on all types of fire doors and systems/equipment in ensuring operation efficiency, cost effective improvements and faster rate of return for the project turn-around has gained extensive appraisals. The SHESB service team has extensive experience, and the necessary certificates and safety courses required for offshore work and have performed installations, surveys, maintenance and recommendations for upgrading and cost-effective improvements.  The doors are all full scale tested against fire, blast and jet fire. The following types of Single Leaf, Double Leaf, Sliding and customize doors are in our product range: NFR, B15, A0, A60, H0, H60, A120 and H120.

Introduction

Fire Rated Doors (FRD) consist of various types e.g. Single Leaf A60, Double Leaf A60 and Sliding Door are recommended for replacement. All components of FRD for offshore facilities adheres to the requirements as follow:

ï‚·    Adhere to design requirement by International Maritime Organization (IMO)
ï‚·    SOLAS & PETRONAS Technical Standard (PTS) 11.22.04: Design of Offshore Living Quarters
ï‚·   Fully certified by the relevant body such as Det Norske Veritas (DNV), American Bureau of Shipping (ABS), Norwegian Petroleum Directorate (NPD) or Lloyds

For FRD in onshore facilities, all components are required to adhere to requirements as follow:

ï‚·    Adhere to design requirement by Universal Building By-Law (UBBL 1984)
ï‚·    PTS 11.14.01: Design and Engineering of Building & MS 1073 (BOMBA & SIRIM)
ï‚·    Certified by Fire and Rescue Department of Malaysia (Jabatan Bomba & Penyelamat Malaysia)

Our work and services include any or all other work and services, which is generally, related to Fire Rated Door. Job Execution shall also be performed on live platforms under simultaneous production and commissioning (SIPCOM) mode as and when required.

Steel Hawk is responsible to provide all fire door design, supervision, procedures, labor, equipment, materials, temporary construction aids, consumables, tools, facilities including transport to point of embarkation, services and all other things of the like nature necessary to perform and complete the intended work.

We are responsible for the packaging of all materials, equipment and fabricated items in good manner for mobilization to offshore and onshore location. Steel Hawk is also responsible to provide the required cargo handling equipment and deliver them to the required PETRONAS CARIGALI’s point of embarkation for mobilization to onshore via truck crane and offshore location via supply vessel or fast crew boat.

Typical WORK to be performed may also include, but not limited to:

ï‚·    General and Dimensional Survey, Measuring and Scoping of WORK
ï‚·    Perform
engineering and design of FRD
ï‚·    Provide construction resources such as material, manpower, equipment, tools, consumables etc. upon WORK execution

​​​Testing and Inspection

We adhere to the requirement of manufacturing of FRD as follow:

Offshore Facilities

ï‚·    Adhere to design requirement by International Maritime Organization (IMO)
ï‚·    SOLAS & PTS 11.22.04: Design of Offshore Living Quarters
ï‚·   Fully certified by the relevant body such as Det Norske Veritas (DNV), American Bureau of Shipping (ABS), Norwegian Petroleum Directorate (NPD) or Lloyds​​​​​

Onshore Facilities

ï‚·    Adhere to design requirement by Universal Building By-Law (UBBL 1984)
ï‚·    PTS 11.14.01: Design and Engineering of Building & MS 1073 (BOMBA & SIRIM)
ï‚·    Certified by Fire and Rescue Department of Malaysia

​​​​All fabrication, assembly, testing and coating shall be performed in strict accordance with the SCOPE OF WORK and the required specification and standards. All Fire Rated Doors, accessories and frames that are supplied by us are certified by an approved third-party services or local authorities based on requirement.

We furnish client with all QA/QC related documents such as mill certificate, inspection report, material test/inspection certification and other pertinent reports during the final inspection and acceptance test.